Request Service Call Now Contact Us Coupons

Best Thermostat Settings Winter Families Can Use

Best Thermostat Settings Winter Families Can Use

A thermostat setting that feels fine at 4 p.m. can leave bedrooms chilly by sunrise or send a heating bill climbing after a week of Kentucky cold. The best thermostat settings winter homeowners can use are not about finding one magic number. They are about keeping your family comfortable when they are home, easing back when the house is empty or everyone is asleep, and making sure your heating system can keep up.

For many Central Kentucky and Kentuckiana homes, a few thoughtful adjustments can make a real difference in comfort and energy use. The right setting also depends on your insulation, windows, heat source, household routine, and whether anyone in the home is especially sensitive to the cold.

Start at 68 Degrees When You’re Home

For most households, 68°F is a practical winter starting point while people are awake and at home. It is warm enough for everyday comfort in a sweater or light layers, yet lower than the 72°F or 74°F setting that can make a furnace run longer than necessary during a cold snap.

That does not mean every family must stay at 68°F. A home with a newborn, an older adult, or someone with a health condition may need a slightly warmer setting. If 68°F leaves your family uncomfortable, move up one degree at a time. The goal is a steady, livable temperature, not a number that looks good on paper while everyone reaches for blankets.

Avoid cranking the thermostat far above your preferred temperature to warm the home faster. Your furnace or heat pump does not usually heat faster because the setting is higher. It simply runs longer, which can lead to an overheated house and wasted energy.

Best Thermostat Settings Winter Schedules Often Follow

A programmable or smart thermostat makes winter comfort easier because it can adjust around the times your household is actually home. Rather than manually changing the temperature every day, create a schedule that matches your routine.

During the day at home

Set the thermostat around 68°F. If your home has cold spots, address the cause before turning up the whole house. A closed supply vent, a blocked return grille, a dirty filter, drafty window, or poorly balanced ductwork can leave one room cold while the rest of the house gets too warm.

While you are away

Lower the setting by about 7°F to 10°F if the home will be empty for eight hours or more. For many families, that means a daytime setting between 58°F and 61°F. This reduces how much heat your home loses while no one is there to enjoy it.

There is a limit. Do not let the house get excessively cold during a Kentucky freeze, especially if you have pipes near exterior walls, in a crawl space, or in an unconditioned area. A conservative setback is the better choice for homes with plumbing concerns or known drafts.

Overnight

Many people sleep well with the thermostat around 60°F to 67°F. Cooler air can be comfortable for sleeping when you have the right bedding, and lowering the temperature overnight can trim heating use. If children’s rooms feel cold, use warm sleepwear and safe bedding practices rather than relying on a space heater as the first solution.

Set the morning temperature to rise shortly before the household wakes up. A smart thermostat may learn how long your equipment takes to reach the set temperature, but a standard programmable model may need you to start the recovery period 30 to 60 minutes early.

Heat Pumps Need a Different Approach

Heat pump homes deserve a little extra care with thermostat setbacks. A heat pump heats efficiently by moving warmth from outdoor air indoors, but its output changes as temperatures fall. A large temperature jump can cause some systems to use auxiliary or emergency electric heat, which costs more to operate.

If you have a heat pump, a smaller overnight or away setback of 2°F to 4°F is often the safer starting point. The best approach depends on your specific equipment, thermostat controls, insulation, and how cold it is outside. If you notice the auxiliary heat indicator coming on frequently after scheduled changes, reduce the setback and ask an HVAC professional to review the system settings.

Never switch your thermostat to emergency heat unless a technician has instructed you to do so or your heat pump has failed. Emergency heat is designed as a backup, not an everyday comfort setting.

Why Your Home May Feel Cold at the Right Setting

The thermostat measures air temperature near its location. It cannot tell whether cold air is spilling through a leaky back door, whether the couch sits beside a drafty window, or whether the upstairs bedrooms receive less airflow than the living room. That is why a home can read 70°F and still feel uncomfortable.

Before raising the thermostat, check the simple items that affect comfort. Replace a clogged HVAC filter, make sure supply vents and return grilles are open and clear, and keep furniture from blocking airflow. Seal obvious gaps around doors and windows, close curtains after sunset, and use ceiling fans on a low clockwise setting to gently circulate warm air that collects near the ceiling.

Humidity matters, too. Winter air inside a heated home can become very dry, making the air feel cooler and irritating skin, throats, and sinuses. A properly sized humidification solution can improve how your home feels at a moderate thermostat setting. Too much humidity can cause window condensation and moisture problems, so this is an area where balanced advice matters.

Do Not Turn the Heat Off When You Travel

Leaving town for a weekend or holiday? Set the thermostat no lower than 55°F, and consider a higher setting if your home is older, poorly insulated, or vulnerable to frozen pipes. Open cabinet doors below sinks on exterior walls so warm household air can reach the pipes. If severe cold is expected, asking a neighbor to check on the home is a smart extra layer of protection.

Smart thermostats can be helpful when you travel because they let you monitor temperatures and make adjustments from away. They are not a substitute for a reliable heating system, though. A thermostat cannot prevent freeze damage if the furnace stops working and no one notices.

Know When a Thermostat Change Is Not the Answer

If you keep raising the setting but your home never gets comfortable, the issue may be your heating equipment or airflow – not your thermostat habits. Watch for rooms that stay cold, weak airflow, unusual noises, frequent cycling, burning or musty smells, rising utility bills, or a system that runs constantly without reaching the temperature you selected.

A furnace or heat pump that is overdue for maintenance can lose efficiency and reliability just when winter weather demands the most from it. Annual heating maintenance helps catch worn parts, dirty components, airflow restrictions, and safety concerns before they become an after-hours no-heat call.

If your heat goes out, your carbon monoxide alarm sounds, or you smell gas, treat it as urgent. Leave the home and contact the appropriate emergency services or gas utility when there is a suspected gas leak. For a heating system that is struggling or has stopped producing heat, Instant Aire is available to help Central Kentucky and Kentuckiana families get comfortable again.

The best winter thermostat setting is the one that keeps your home toasty and snug without asking your equipment to work harder than it should. Start with a steady 68°F when you are home, make modest adjustments for sleep and time away, and pay attention when comfort does not match the number on the wall. Your family should be able to settle in for the evening, not keep negotiating with the thermostat.